SWM Contact Us | Home
Accessories  |  Aircraft  |  Boats  |  Cars  |  Helicopters  |  Engines  |  Radio  |  World Models  |  Enya  |  Latest News
Search



Today on SWM
Steve Webb Models
Safe Internet Shopping
at ServoShop.co.uk

About Us

Gallery

The Shop

Mail Order

Links


Steve Webb
Exclusives & Specials
Click the Buy Link to buy on line
at ServoShop


The Wings Maker
EPO & Balsa Models


Wings Maker FC-1
6 Cell EDF


Ultimate EP
J10 Special
Show Edition

Sky Nova 2
Pre Assembled Combo


See E.P Ogar Kit EPO
*
Ogar EP BL Combo*
*Wing Bags Included


The World Models
Full Range


Multi Rotor
Quad Shop


HPI
Main Dealer
RC Experts in Store


Opti Fuel
Now In Stock
and also

Cool Power
Model Technics
Sidewinder and Much More


JR DS588HV High Voltage Digital Servo

JR Propo (JRC588HV) DS588HV High Voltage Digital Servo

DS588HV Standard/Popular Type High Voltage Digital Servo.

Battery chemistries such as Li-Po, Li-Ion, and Li-Fe have become very popular within the RC community. They are the standard for powering electric motors and have also gained popularity as receiver battery packs. The issue isthe output voltage of these batteries is higher then the previous standard 4 - and 5-cell NiCd and NiMH packs, 4.8V and 6V respectively. The higher voltage is not an issue with the receivers but can be for the servos. Many servos will not operate at these higher voltages for very long before burning out the motors or electronics.

To get around this issue modellers have had to use a regulator to drop the voltage to an acceptable operating range for their servos, usually around 5 to 6 volts. The addition of a regulator adds a component that, should it fail, can cause the loss of a model.

JRs HV servos are designed with motors and electronics that operate off the direct voltage of a 2-cell Li-Po, Li-Ion, or Li-Fe receiver battery pack (6.6V to 7.4V nominal voltage). This eliminates the need for a regulator and lowers the chance for a power failure that can cause a catastrophic failure of your model. Also note that the HV servo specs are shown at the higher voltage (7.4V 2S LiPo) but will still operate on a standard 5-cell 6V NiCd, Ni MH battery with a reduction in performance of approximately 10% in speed and torque.

Specifications:

  • Torque: 4.2Kg.cm (6.0v) / 5.2Kg.cm (7.4v)
  • Speed: 0.26s/60 (6.0v) / 0.21s/60 (7.4v)
  • Weight: 42g
  • Dimensions: 35.5 x 19 x 38.5mm
  • Operation Voltage: 6.0V - 8.5V
picture

Price

£17.99 Each
 

Buy online at
ServoShop.co.uk
picture
 
Privacy statement © SWM Limited 2017 Contact Us